CIS-209
July 2000
Wind Off
Check the frame counter window.
X’s must be visible.
If not, grip camera, press Shutter Button, and
turn Thumbwheel until film is fully rewound.
Insert special tool into end slot (as shown).
Open Film Door
Use tool to bend cover back and remove film.
Remove Film
© Eastman Kodak Company, 2000
Insert Tool
CAUTION: This camera body
contains a high voltage capacitor
and circuit board. To avoid electric
shock, do not pry apart the front and
back sections of camera. Remove
only film and battery from their
respective compartments. If sections
of the camera are separated, do not
touch the circuit board.
Exposed Film
Opened camera with film removed.
Shutter Button
Thumbwheel
5
Place used camera in recycle bin.
Return camera to Kodak for recycling.
CAUTION: To avoid injury, use tool carefully.
CURRENT INFORMATION SUMMARY
Opening Instructions for the
KODAK MAX HQ Flash One-Time-Use Camera
Wear eye protection when opening all cameras.
To Next Page
Need help?
General
