Using your camera
20 www.kodak.com/go/support
Using the Trim Video feature
Use the Trim Video feature to remove an unwanted video start
and/or finish, leaving only the desired portion.
1 Press the Review button, then to find a video to trim.
Optional: Play, then pause the video at the desired new start
point.
2 Press the Settings button .
3 Press to choose Trim Video, then press OK.
An instruction screen appears. After you read it, press OK.
4 When prompted, press to move the Start marker to the
new position, then press OK. Press to move the End
marker to the new position, then press OK.
NOTE: If you need to make adjustments, press to highlight the Start or
End marker, then press to move it. When finished, press OK.
5 When prompted, preview your edit or save the edits without
previewing. Save the video, or Save As if you want to keep
the existing video, as well.
urg_01223.book Page 20 Sunday, January 16, 2011 1:57 PM
To Next Page
Loading...
