CONTENTS INDEX SEARCH HELP
Operator’s Guide
Printing
Guide
Color Management
Calibration
Color Management
Options
Using Color
Connector
Using PANTONE®
Color
Network
Interface Guide
Setting Custom Rendering
Do the following steps to set custom rendering.
NOTE: If you wish to set custom rendering for more than one puzzle
piece in the template, you need to repeat this procedure for each
piece.
1. Pull down the Rendering
drop-down list box, and
select “Custom”.
2. Build the connector file you need for your job. Ref
er to “Color
Managing Multiple Sources.”
3. Double-click on the source or simulation puzzle piece in the color
connector socket in the template for which you wish to set custom
rendering.
To Next Page
Loading...
