To Next Page
S
Steven LewisJul 26, 2025
What to do if my Kodak Printer is jammed?
- JJared AndersonJul 26, 2025
If your Kodak printer is jammed, it could be due to a paper or color cartridge issue. Here's what you can do: * Use only Kodak color cartridge & paper kits; do not use inkjet paper. * If the Paper light is blinking, remove the paper tray, unplug the AC power cord for 5 seconds, then plug it back in. If the paper doesn't eject automatically, remove it manually. * Check the paper slot on the back for jammed paper. Remove the paper supply from the tray and 'fan' the paper to prevent sticking. * Reload the paper tray, not exceeding the fill line. * Re-install the paper tray, then press the print button to resume. * If the Color cartridge light is blinking, remove the cartridge, remove any slack from the ribbon, and re-install it. Press the print button to resume.
General
