Kodak EasyShare Printer Dock Plus User Manual

Troubleshooting
44 www.kodak.com/go/support
Battery charging lights
Light status Cause Action/solution
All lights are off The camera is not properly
seated on connector.
Reseat the camera on the
printer dock (page 9).
An unrecognized battery type
is installed, or no battery is
installed.
Install a Kodak EasyShare
Ni-MH rechargeable battery
pack or Kodak EasyShare
Li-Ion rechargeable battery
(page 7).
One steady green light The camera was just placed
on the dock.
None; the dock is checking
the charge status of the
battery.
Ascending steady green
lights
The battery is charging.
Charging is complete when
all three lights are lit.
Leave the camera on the
dock to continue charging or
maintain the charge.
One blinking red light The battery is not properly
installed.
Re-install the battery in the
camera.
The battery or connector pin
is damaged.
Check for damage.
The camera and battery have
been exposed to extreme
temperatures.
Slowly return the camera and
battery to room temperature.
Descending blinking
green lights
The Ni-MH battery pack
refresh cycle is in progress
(discharging). Lights turn off
as discharging progresses.
Leave the camera on the
dock to continue the refresh
cycle (page 10).

Kodak EasyShare Printer Dock Plus Specifications

General

Maximum resolution	300 x 300 DPI
Time to first page (color, normal)	75 s
Minimum RAM	64 MB
Minimum processor	233 MHz
Minimum storage drive space	200 MB
Minimum system requirements	CD-ROM USB Mac: PowerPC MACINTOSH
I/O ports	USB
File type	JPEG/EXIF v2.2
Power requirements	24V AC
Compatible operating systems	WINDOWS 98, 98SE, 2000, ME, XP OS MACINTOSH OS 10.2
Custom media sizes	10 × 18 cm, 15 cm
Market positioning	Home & office