Printing without a computer
www.kodak.com/go/support
13
Printing from the internal SD/MMC card
reader
Use the built-in card slot to print pictures directly from your SD/MMC card.
NOTE: To help you select pictures to print, dock your EasyShare camera (see page 9)
before
inserting the card into the SD/MMC card slot.
1 Open the accessory door on the printer dock.
IMPORTANT:
Insert card only as shown. Do not force the card into the card slot,
and do not insert or remove a card when the printer dock is
transferring pictures (see page 27).
2 Orient the card as shown, then push the card
into the SD/MMC card slot to seat the
connector.
NOTE: If an SD/MMC card is already inserted but the
connection has timed-out, remove then reinsert the
card to re-establish a connection.
The SD/MMC card slot light blinks while the
printer dock reads the card, then glows steady
green.
■ To print the current picture, press the Print
button, .
NOTE: If you tagged pictures for printing using your
EasyShare digital camera, instead of printing the
current picture, all tagged pictures will be printed (see
page 15).
■ To exit without printing, press the Cancel
button, .
To remove the card, pull it out.
Purchase an SD or MMC card and other accessories at a retailer of Kodak
products, or visit www.kodak.com/go/accessories.
Notched corner
To Next Page
Loading...
Need help?
General
