www.kodak.com/go/support 25
6 Using the printer dock plus
with a computer
Connecting to a computer
A USB cable is required to connect the printer dock to a computer. Use the
USB cable that came with your Kodak EasyShare digital camera. To purchase a
cable separately, see a retailer of Kodak products, or visit
www.kodak.com/go/accessories.
IMPORTANT:
Make sure your camera is NOT docked when you connect the
printer dock to the computer.
1 Make sure Kodak EasyShare software is installed on the computer (see
page 22).
2 Plug the labeled end of a USB cable into
the labeled USB port on your computer. See
your computer documentation for details.
3 Plug the other end of the USB cable into the
square USB connector on the back of the
printer dock.
To Next Page
Loading...
