Kodak EasyShare Printer Dock Plus User Manual

Getting started
4 www.kodak.com/go/support
Handling and storing the color cartridge
■ For best quality prints, store the color cartridge in a location where the
temperature does not exceed 85
°F (30 °C).
■ To avoid getting fingerprints on the ribbon, handle the color cartridge by
the spool ends.
■ Keep the color cartridge away from direct sunlight and out of
high-temperature environments (such as a vehicle parked in the sun).
Installing and removing the color cartridge
IMPORTANT: Use only Kodak color cartridge & paper kits for your printer dock.
Do not force the cartridge in or out of the printer dock.
1 Open the cartridge door on the side of the printer dock.
2 Check to make sure there is no slack in the
color cartridge ribbon.
To remove slack, push in on the cartridge
spool, then rotate the spool clockwise.
IMPORTANT:
Be careful not to rotate the spool
more than necessary. Doing so could
reduce the number of prints you are
able to make.
3 Slide the color cartridge in, label side up, with
the arrow pointing toward the printer dock.
Push the cartridge until it "clicks" into place.
4 Close the cartridge door.

Kodak EasyShare Printer Dock Plus Specifications

General

Maximum resolution	300 x 300 DPI
Time to first page (color, normal)	75 s
Minimum RAM	64 MB
Minimum processor	233 MHz
Minimum storage drive space	200 MB
Minimum system requirements	CD-ROM USB Mac: PowerPC MACINTOSH
I/O ports	USB
File type	JPEG/EXIF v2.2
Power requirements	24V AC
Compatible operating systems	WINDOWS 98, 98SE, 2000, ME, XP OS MACINTOSH OS 10.2
Custom media sizes	10 × 18 cm, 15 cm
Market positioning	Home & office