Care and maintenance
34 www.kodak.com/go/support
Cleaning the paper feed roller
To prevent misfeeds and to make sure your pictures look their best, we
recommend that you keep the paper feed roller clean. Inspect the roller weekly
for debris particles, and clean if necessary.
IMPORTANT:
Unplug the power before cleaning the paper feed roller.
1 Unplug the AC power cord from the power outlet.
2 Remove the paper tray from the printer dock, and leave the paper tray door
open.
3 Lightly moisten a lint-free cloth with water.
IMPORTANT:
Do not use cotton or cotton swabs to clean the print roller.
4 Use the moistened cloth to gently wipe clean
the surface of the paper feed roller. Advance
the feed roller with your thumb as necessary,
and continue cleaning.
5 Allow the paper feed roller to fully dry before
reconnecting the power.
Traveling with your printer dock
IMPORTANT:
When traveling, keep the printer dock, accessories, and supplies
away from direct sunlight and out of high-temperature
environments (such as a vehicle parked in the sun).
Consider purchasing the AC power cord for the region to which
you are traveling.
1 Disconnect the power and remove all cables.
2 Remove the paper tray from the printer dock; close the paper tray cover
and the paper tray door on the printer dock.
3 Repack the printer dock in the original packing box, or use the optional
printer dock travel bag.
Purchase an AC power cord, printer dock travel bag, and other accessories at
a retailer of Kodak products, or visit www.kodak.com/go/accessories.
To Next Page
Loading...
Need help?
General
