Installing software
www.kodak.com/go/support
23
4 Follow the on-screen instructions to install the software.
■ Select Complete to automatically install the most commonly used
applications. Select Custom to choose the applications you wish to
install.
IMPORTANT:
To use the printer dock plus with a computer, you must install the
printer driver. If you choose Custom installation, make sure the
printer dock is selected. The printer driver is automatically installed
if you choose Complete installation.
Add the printer for Mac OS X:
a Open the finder window and click the Applications button. If you don’t
see the Applications button, open the Applications folder on your
operating drive.
b Open the Utilities folder, then double-click Print Center.
c In the Printer List window, click the Add Printer button.
d Select the printer dock, then click Add.
The printer dock is added to your computer.
IMPORTANT:
When prompted, take a few minutes to electronically register your
printer dock and software. This lets you receive information
regarding software updates and registers some of the products
included with the printer dock. You must be connected to your
Internet service provider to register electronically. To register later,
visit
www.kodak.com/go/register
.
5 Restart the computer if prompted. If you turned off anti-virus software, turn
it back on. See the anti-virus software manual for details.
For more information on installing the software, see the ReadMe file on the
Kodak EasyShare software CD.
For information on the software applications included on the Kodak EasyShare
software CD, click the Help button in the EasyShare software.
To Next Page
Loading...
Need help?
General
