12 | EN
printer with the app, and start using your
new KODAK SMILE printer!
If you have trouble connecting your printer
from the application, try following these steps
instead:
1. Access your phone’s BLUETOOTH settings,
usually found under the general Settings
menu.
2. Make sure the printer is on irst, and then
allow your phone to scan for new devices.
3. You will see “KODAK SMILE XX:XX” appear
in the BLUETOOTH list. The X’s will be
replaced with speciic letters and numbers
which correspond to your speciic printer.
Tap on it to start pairing.
4. After a couple of seconds, your phone
should say “paired”.
In Case of Paper Jam
If the printer jams while attempting to print,
follow these steps to resolve the issue:
1. Use a small pin/needle/paper clip to press
the reset button on the side of the printer
next to the charging port.
To Next Page
Loading...
