How to fix jagged or inappropriately colored image on Kodak DIGITAL SCIENCE DC220 monitor?
If the image on your Kodak Digital Camera monitor is jagged or inappropriately colored, adjust your monitor display settings.
Why Kodak Digital Camera does not recognize my memory card?
If your Kodak Digital Camera does not recognize your memory card, be sure that memory cards must be ATA compatible and CompactFlash certified to work with the camera.
What to do if Kodak Digital Camera memory card is full?
If your Kodak Digital Camera says the memory card is full, transfer pictures to your computer or insert a memory card that has available memory.
Why is my Kodak DIGITAL SCIENCE DC220 Digital Camera picture too dark?
If your Kodak Digital Camera picture is too dark, turn on the flash. If the subject is too far away, move closer so there is no more than 10 feet (3 m) between the camera and the subject. If the subject is in front of a bright light, change your position so the light is not behind the subject.
How to fix a Kodak DIGITAL SCIENCE DC220 picture that is not clear?
If your Kodak Digital Camera picture is not clear, clean the lens. When taking pictures using Close-up, stand at least 8 in. (20 cm.) away. Hold the camera steady until the picture is taken. If using flash, ensure the subject is less than 10 ft. (3 m) away.
Why is my Kodak DIGITAL SCIENCE DC220 Digital Camera picture too light?
If your Kodak Digital Camera picture is too light, change to automatic flash. If the subject is too close when the flash was used, move so there is at least 1.6 ft. (0.5 m) between the camera and the subject. Make sure your hands or other objects do not cover the light sensor.
What to do if my Kodak DIGITAL SCIENCE DC220 needs service?
If your Kodak Digital Camera needs service, have the camera serviced.
What to do if Kodak Digital Camera transfer of pictures was interrupted?
If the transfer of pictures from your Kodak Digital Camera was interrupted and not all pictures were sent, try the transfer again.
What to do if Kodak DIGITAL SCIENCE DC220 Digital Camera cannot read memory card?
If your Kodak Digital Camera cannot read the memory card, insert a new or reformat the memory card.
Why is the ready light red on my Kodak Digital Camera?
If the ready light on your Kodak Digital Camera is red, insert a new memory card.
General| Brand | Kodak |
|---|---|
| Model | DIGITAL SCIENCE DC220 |
| Category | Digital Camera |
| Language | English |
Describes the key hardware features of the DC220 and DC260 cameras.
Lists the minimum PC specifications needed to install and run the camera software.
Provides step-by-step instructions for installing the bundled software from the CD.
Identifies and explains the various buttons, ports, and components of the digital camera.
Details the different icons and information shown on the camera's status display.
Explains how to manage battery life and use the AC adapter for continuous power.
Guides the user on how to switch the camera to the mode used for taking photos.
Explains how to configure various camera settings like picture type, white balance, and flash.
Details how to use the optical and digital zoom functions to frame subjects.
Instructs on how to access the mode for viewing, editing, and managing captured photos.
Explains the different methods to browse through photos on the camera's LCD.
Describes how to select multiple pictures for operations like deletion or copying.
Provides instructions for removing single or multiple pictures from the memory card.
Guides users on how to locate and launch the camera's configuration software on a computer.
Explains how to configure general camera properties like communication method and date/time.
Details how to adjust camera-specific settings such as flash mode, focus, and picture type.
Helps determine the best connection method (Serial, USB, IrDA) based on computer support.
Provides steps for establishing a connection using a USB cable.
Offers solutions for common issues encountered during camera-to-computer connections.
Introduces the Mounter software for viewing, transferring, and managing camera pictures.
Explains how to view photos using the Mounter software, either as files or thumbnails.
Details the process of moving photos from the camera to the computer.
Describes how to access pictures by inserting the memory card into a card reader.
Provides instructions for installing the TWAIN software required for picture transfer.
Guides the user on launching the TWAIN software and selecting the camera as the source.
Explains how to select and transfer desired pictures using the TWAIN interface.
Covers essential care, handling, and safety precautions for the camera.
Provides a guide to diagnose and resolve common issues with the camera's operation.
Explains the meaning of various error messages displayed on the camera's LCD.
Details how to obtain assistance for the software bundled with the camera.
Provides information on accessing support through Kodak's website and online platforms.
Lists contact information and procedures for obtaining technical assistance from Kodak.
Lists the necessary system configurations and software for using Digital Access.
Step-by-step guide for installing the Digital Access software on a Macintosh computer.
Explains how to retrieve photos from the camera's memory card using the software.
Details methods for transferring individual photos or contact sheets to the computer.
Provides instructions on how to save photos from the application to the computer's hard drive.
Outlines the conditions and exclusions that are not covered by the product warranty.
Explains the process for requesting warranty repair service and returning the product.
Details the device's compliance with FCC rules regarding radio frequency interference.
Confirms the digital apparatus meets Canadian regulations for radio noise emissions.
To Next Page