4-8
Copying marked pictures from camera to camera
You can send marked pictures to or receive marked pictures from another camera
in the Review mode:
6 Press the right arrow to add the selected
character to the name.
☞ Press the left arrow to backspace.
7 Add additional characters until you have
spelled the name you want using a maximum
of 8 characters.
8 When you are satisfied with the name, press
the DONE softkey.
The marked pictures are moved to the album
you created and the Album screen appears.
1 Place the two cameras facing each other
aligning their infrared transceivers.
During Camera to Camera communication,
the cameras communicate via infrared port.
2 Make sure both cameras are in the Review
mode.
3 Press the MENU button on the receiving
camera.
4 Press the down arrow key to highlight
RECEIVE.
5 Press the MENU button on the sending
camera.
6 Press the down arrow key to highlight SEND.
7 Press the SEND softkey.
The marked pictures are copied from one
camera to the other.
To Next Page
Loading...
Need help?
General
