To Next PageTo Next Page
Need help?Do you have a question about the Kodiak K12 and is the answer not in the manual?
General| Category | Scrubber |
|---|---|
| Power Source | Battery |
| Type | Walk-behind |
| Brush Deck Size | 12 inches |
| Brush Width | 12 inches |
Explains the location of the machine's serial number for identification.
Defines the commercial applications and floor types for which the machine is designed.
Section for recording machine model, serial number, and installation date for future reference.
Provides instructions on how to safely remove the machine from its shipping pallet.
Outlines operational restrictions, safe operating practices, and pre-service procedures.
Details specific risks like electrical shock, battery hazards, chemical exposure, and machine handling.
Identifies and labels key components of the scrubber machine.
Details the controls and indicators on the machine's central command panel.
Step-by-step guide for installing the squeegee assembly onto the machine.
Instructions for adjusting the squeegee for optimal cleaning performance.
Procedures for connecting and preparing the machine's batteries.
Guidance on connecting and using the battery charger safely and effectively.
Explains how to operate the machine in the forward direction.
Explains how to operate the machine in the reverse direction.
Instructions for filling the machine's clean water and solution tank.
Details the process of operating the machine for scrubbing floors.
Instructions on how to use the machine's vacuum system for drying.
Procedures for emptying the dirty water recovery tank.
Steps for flushing the recovery tank to maintain cleanliness.
Describes the use of the vacuum wand accessory for cleaning.
Details the functionality and use of the onboard battery charger.
Explains how to adjust the brush pressure for different cleaning tasks.
Describes the function and indication of the vacuum clog warning light.
Step-by-step guide on how to charge the machine's batteries.
Instructions for cleaning the white filter or screen component.
Procedures for safely removing the disk brushes from the machine.
Steps for rotating the grout brush to ensure even wear.
Guide on how to replace the orbital pads used for cleaning.
Instructions for cleaning the filter in the solution delivery system.
Detailed steps for replacing the squeegee blades.
Procedures for emptying the clean solution tank.
Instructions for replacing the deck shroud curtain for debris containment.
Steps for replacing the side wipers used with grout brushes.
Procedures for adjusting the deck to ensure proper leveling for optimal cleaning.
Lists part numbers for edge pads and screens for different scrub deck sizes.
Details part numbers for round disk brushes and pads.
Lists part numbers for cylindrical brushes.
Information on squeegee blade kits, assemblies, and material types.
Maintenance checklist for periodic inspections and servicing of the machine.
Description of available console and onboard battery charger models.
Electrical schematics illustrating the machine's wiring and component layout.
Electrical schematics detailing adjustments for down pressure control.
Identifies various decals and their corresponding part numbers for the machine.
