Pre-Operation Checklist
P
Check and lubricate the machine per the schedule outline
in the Maintenance Section.
Exhaust gas contains poisonous carbon monoxide. Never
run the generator in an enclosed area. Be sure there is
adequate ventilation in the work area.
Check all electrical connections. Replace, repair or clean
as required.
Make sure that all lids, guards and shields are in place,
secured and functioning as designed.
Check condition of the battery and other electrical
components. Keep all components in good condition.
Check the fuel level, Starting with a full tank will help to
eliminate or reduce operating interruptions for refueling.
Check engine fluid levels. Top up as required. Refer to the
engine operators manual.
Check the air filter
Check all power cords that will be used, ensure they are in
good repair.
Check that the alternator cooling air intake and discharge
openings are free and unblocked
To Next Page
Loading...
