Kodiak Kong K-18KTRB-4

To Next Page

27878 - K-18KTRB-4 Operating Instructions and Precautions 07212301

Charging: This product is rechargeable. Please charge fully before first use to ensure optimal

performance. To do so, pull back the charging port cover located directly behind the power

button. Connect the full-sized USB plug of the included charging cable to a USB power source

such as a power cube, computer or car adapter and the USB-C plug into the charging port of the

flashlight. A green flashing light or lights above the power switch indicates charging is in

progress. Charging is complete when all 4 charging / battery life indicators are solid green. DO

NOT USE THE FLASHLIGHT WHILE IT IS CHARGING!

LOCK OUT PROTECTION: This flashlight automatically locks after 2 minutes of non-use!

Double click the power button to unlock the flashlight. The light blinks twice to confirm it is

unlocked. Click again to select your desired brightness mode. Double clicking the power

button also manually locks the flashlight, preventing accidental activation. The light blinks

twice to confirm it is locked.

Flashlight Operation: Repeatedly pressing the power button on the side of the flashlight cycles

through high, medium and low brightness modes plus off.

Long pressing the power button while in any light mode including off activates the turbo

brightness mode. The light automatically reverts to high brightness after 30 seconds.

Long pressing the power button for 10 seconds while locked activates the Kodiak® locator LED

on the power switch. Helps locating the flashlight in the dark. The indicator shuts off once the

flashlight is unlocked. NOTE: Using the locator LED reduces battery life.

To adjust the beam size, hold the body of the flashlight stationary while twisting the head

clockwise or counterclockwise.

Charging a Smartphone: Pull back the charging port cover. Using your own phone charging

cable, connect the full-sized USB plug into the flashlight’s USB port. Connect the other end to

your device.

Battery Replacement: Please contact the manufacturer for information on rechargeable

battery replacement.

Caution: Due to high light output, certain areas of this flashlight may become hot while in use.

Avoid touching the area where the “HOT” symbol is visible.

Caution: Lithium batteries can explode or cause burns if shorted, overheated, disassembled,

recharged or exposed to fire or high temperature (above 212°). If the flashlight is turned on

while in a container or in clothing, the flashlight can overheat, damage the flashlight and/or

cause surrounding material to ignite.

Need help?

Do you have a question about the Kodiak Kong K-18KTRB-4 and is the answer not in the manual?

This document describes the Kodiak® K-18KTRB-4 Flashlight, a rechargeable device designed for various lighting needs and featuring smartphone charging capabilities.

Function Description:

The Kodiak® K-18KTRB-4 is a versatile flashlight offering multiple brightness modes, a turbo mode for intense illumination, and a locator LED for easy retrieval in the dark. Its primary function is to provide portable light, with the added utility of being able to charge a smartphone. The flashlight is rechargeable via a USB-C port and includes a full-sized USB port for output charging. It incorporates a lock-out protection mechanism to prevent accidental activation and offers adjustable beam size.

Important Technical Specifications:

Charging Input: USB-C port.
Charging Output: Full-sized USB port for smartphone charging.
Battery Type: Lithium rechargeable battery.
Charging Indicators: Four green flashing lights indicate charging in progress; solid green lights indicate a full charge.
Lock-out Protection: Automatic after 2 minutes of non-use; manual activation also possible.
Brightness Modes: High, medium, low, and turbo.
Turbo Mode Duration: Automatically reverts to high brightness after 30 seconds.
Locator LED: Kodiak® locator LED on the power switch, activated by long-pressing the power button for 10 seconds while locked.
Beam Adjustment: Twist the head clockwise or counterclockwise while holding the body stationary.

Usage Features:

Charging the Flashlight:
1. Pull back the charging port cover behind the power button.
2. Connect the full-sized USB plug of the included charging cable to a USB power source (e.g., power cube, computer, car adapter).
3. Connect the USB-C plug into the flashlight's charging port.
4. Green flashing lights indicate charging.
5. Solid green lights (all four) indicate a full charge.
6. Important: Do not use the flashlight while it is charging.
7. Charge fully before first use for optimal performance.
Unlocking/Locking the Flashlight:
- Automatic Lock: The flashlight automatically locks after 2 minutes of non-use.
- Unlocking: Double-click the power button. The light blinks twice to confirm it is unlocked.
- Manual Locking: Double-click the power button. The light blinks twice to confirm it is locked. This prevents accidental activation.
Operating the Flashlight (Brightness Modes):
- Cycling Modes: Repeatedly press the power button on the side to cycle through high, medium, low brightness modes, and off.
- Turbo Mode: Long-press the power button while in any light mode (including off) to activate turbo brightness. The light will automatically revert to high brightness after 30 seconds.
Using the Locator LED:
- While the flashlight is locked, long-press the power button for 10 seconds to activate the Kodiak® locator LED on the power switch. This helps locate the flashlight in the dark.
- The indicator shuts off once the flashlight is unlocked.
- Note: Using the locator LED reduces battery life.
Adjusting Beam Size:
- Hold the body of the flashlight stationary.
- Twist the head clockwise or counterclockwise to adjust the beam size.
Charging a Smartphone:
1. Pull back the charging port cover.
2. Connect the full-sized USB plug of your own phone charging cable into the flashlight's USB port.
3. Connect the other end of your cable to your smartphone or device.

Maintenance Features:

Battery Replacement: Contact the manufacturer for information on rechargeable battery replacement.
Storage:
1. Double-click the power button to lock the flashlight.
2. For extended periods of non-use, remove the rechargeable battery.
3. To remove the battery: Unscrew the battery compartment cap at the bottom of the flashlight, remove the battery, and screw the cap back on tightly.
4. To re-insert the battery: Unscrew the cap, insert the battery positive (raised) end first, and screw the cap back on tightly.
5. Double-click the power button to unlock the flashlight before use.

Safety Precautions:

Eye Safety: Do not stare into the light, shine light into eyes, or focus the beam using an additional lens to prevent serious injury, including temporary or permanent loss of sight.
Child Safety: Keep away from infants and toddlers as this product contains small parts.
Product Integrity: This product is not a toy. Use it only as intended. Inspect before every use and do not use if parts are damaged, loose, or missing.
Heat Warning: Due to high light output, certain areas of this flashlight may become hot during use. Avoid touching areas marked with a "HOT" symbol.
Lithium Battery Safety: Lithium batteries can explode or cause burns if shorted, overheated, disassembled, recharged, or exposed to fire or high temperatures (above 212°F).
Overheating Risk: If the flashlight is turned on while in a container or in clothing, it can overheat, damage the flashlight, and/or cause surrounding material to ignite.