SXA MAN 04/05 Page14
TROUBLESHOOTING continued
GENERATORS
No-fuse breaker is “0”
position
After making sure that the total
wattage of the electrical appliance
is with in permissible limits and
there are no defects in the
appliance, turn the no-fuse breaker
to the “1” position
The GFCI receptacle has
tripped or has not been set
Press the reset button in the GFCI
receptacle
Contact your local Kodiak dealer
for assistance
If problem persist please call the Kodiak toll free hot-line below for the service center
nearest you.
Customer Service hot-line:
1-800-461-1323