EasyManuals Logo

Kodiak SXB5500HX Operating And Maintenance Instructions

Default Icon
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
SXA MAN 04/05 Page6
Remove the tank cap and check the fuel level. If fuel level is low, refill with unleaded
automotive gasoline.
OPERATION
Starting the engine:
(a) Read Honda Engine Owners Manual.
(b) Open fuel cock.
(c) Set choke lever towards the “close” position when engine is cold.
If engine is warm, choke lever should be moved to the “Open” position.
(d) Set the engine switch to the “run” position.
(e) Pull on starter rope with a fast steady pull to start the engine.
(f) After engine has started, move the choke lever back gradually to the “Open
position.
(g) Once the engine is running at normal speed, useable AC power is available.
Applying AC load (single voltage type)
(a) Place generator’s “no fuse breaker” switch in the0” position.
(b) Start engine (Please refer to the Honda Engine Owner’s Manual.)

Other manuals for Kodiak SXB5500HX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kodiak SXB5500HX and is the answer not in the manual?

Kodiak SXB5500HX Specifications

General IconGeneral
BrandKodiak
ModelSXB5500HX
CategoryPortable Generator
LanguageEnglish

Related product manuals