42
Child protection
Fig.
10
Once the child protection is activated,
the chosen settings cannot be
changed. The washing machine can
only be switched o with the on / o
switch, whereby settings and wash
progress are saved and the washing
process can be continued after
switching the machine back on. The
child protection can only be activated
if the washing machine operation was
started or is running either directly or
by time delay.
1. Activation: Press the TEMP.
and SCHLEUDERN buttons at
once for at least 3 seconds. The
corresponding symbol of the control
panel indicates the child protection
.
2. De-activation: Press the TEMP.
and SCHLEUDERN buttons again
at once for at least 3 seconds. The
corresponding symbol of the control
panel turns o.
Disabling the alarm sound
To permanently deactivate the signal tone,
press the TEMP. button for at least 3 seconds
while the washing machine is switched on. To
turn on the signal, press the TEMP. button
again for at least 3 seconds while the washing
machine is on.
Cleaning and care
Warning
• When cleaning, never use solvents or
abrasive materials, hard brushes, metallic
or sharp objects. Solvents are harmful to
human health and can attack plastic parts,
while abrasive cleaning mechanisms and
tools may scratch the surface(s).
• Switch o the washing machine and let it
cool down completely before cleaning.
• Clean the exterior surfaces of the product
with a slightly damp cloth and dry them
well. Make sure that no water enters the
product interior (e.g. at the switches).
Fig.
11
Cleaning the detergent drawer
• Pull out the drawer. Press the tab
marked with an arrow above the
fabric softener compartment and pull
out the drawer completely.
• Wash the chambers with water.
• If necessary, use a soft brush to
clean the housing.
• Insert the detergent drawer.
IM_KWM7122B_INV_201118_V10_HR.indb 42IM_KWM7122B_INV_201118_V10_HR.indb 42 18/11/2020 4:19 PM18/11/2020 4:19 PM
To Next Page
Loading...
Need help?
General
