Koenig KBP40 - User Manual

Questions and Answers

B
barkercolleenJul 28, 2025
Why is my Koenig KBP40 cycle normal but not producing ice?
- V
  vanessamortonJul 28, 2025
  If the ice maker cycle seems normal but no ice is being produced, it could be due to high ambient or water temperatures. Try operating the Koenig Ice Maker in an environment where the ambient temperature is less than 32°C, and use cold water to fill the water reservoir. If the issue persists, it might indicate a refrigerating system leak or blockage, in which case you should contact customer service.
B
Benjamin WalkerAug 1, 2025
Why is the indicator light on my Koenig KBP40 Ice Maker on?
- S
  Scott WilsonAug 1, 2025
  If the indicator light on your Koenig Ice Maker is illuminated, it could be due to a few reasons. First, the ice basket might be full, blocking the infrared light; remove some ice. Second, the infrared light-emitting diode and light-receiving diode may be obstructed; wipe any foreign objects from these and restart the ice maker. If it still doesn't work, contact customer service.
K
Kristy BlanchardAug 5, 2025
How to improve poor ice-making result of my Koenig KBP40?
- A
  aliciajonesAug 6, 2025
  For poor ice-making results with your Koenig Ice Maker, ensure proper heat dissipation by leaving an 8-inch (20cm) clearance on all sides for ventilation. Also, the water temperature may be too high; fill the water reservoir with water between 8°C and 28°C. Finally, the ambient temperature might be too high; operate the ice maker in an environment between 10°C and 32°C.
K
Karen VanceAug 10, 2025
Why does the ice collect together in my Koenig KBP40 Ice Maker?
- M
  Michael GonzalezAug 10, 2025
  If the ice collects together in your Koenig Ice Maker, it might be because making ice is taking too long. Stop the current cycle and restart it after the ice melts. Alternatively, the water in the reservoir might be too cold; fill it with water between 8°C and 25°C.
D
Deborah DonaldsonAug 14, 2025
What to do if the indicator blinks on my Koenig KBP40?
- L
  Lauren HubbardAug 14, 2025
  If the indicator light on your Koenig Ice Maker is blinking, the ice shovel might be blocked. Remove any ice obstructing the shovel. If the issue continues, contact customer service.
M
Melissa JonesAug 18, 2025
Why is the ice basket full but the indicator not illuminating on my Koenig KBP40?
- C
  Carolyn NunezAug 18, 2025
  If the ice basket is full but the indicator does not illuminate on your Koenig Ice Maker, it may be because sunlight is interfering with the infrared light module. Unplug the appliance, move it to a location away from direct sunlight, and then plug it back in and turn it on.
A
Ana WoodsAug 23, 2025
What to do if my Koenig KBP40 Ice Maker stops working?
- L
  Lisa StevensAug 23, 2025
  If your Koenig Ice Maker stops working, the ice tray might not be in the correct position. Remove the ice from the tray and press the restart button. If it still does not work, contact customer service.