Powering off
Press the power button to turn the appliance off.
Draining water
Before cleaning the appliance or changing the water, the water inside the appliance must
first be drained out.
Unplug the drain plug from the bottom of the appliance and allow the water to flow out.
You may also connect a soft plastic tube to help guide the water out.
Refilling
The water level should be checked regularly. If there is insufficient water, the appliance will
stop operating automatically. The low water level indicator ‘ ’ will illuminate to indicate
more water is required.
1. Press the power button to turn the appliance off.
2. Open the side door and fill water up to just below the ‘MAX’ line. Allow the
refrigerant inside the appliance to cool for at least 3 minutes.
3. Press the power button again to turn the appliance on and resume use.
• To maintain hygiene, the water must be changed every 24 hours.
• If the appliance will not be used, drain the water and dry the water tank.
To Next Page