12
CLEANING AND MAINTENANCE
WARNING! To avoid an electric shock, always unplug your fridge
before cleaning.
Cleaning the inner cabinet
• Caution: Before using any cleaning products, please read and follow
the manufacturer’s instructions and warnings to avoid any damage to
your fridge or personal injury.
• Upon installation of your new appliance, it is recommended that it be
cleaned thoroughly.
• Wash the inside with a damp warm cloth containing a water and
baking soda solution.
• The solution should be about 2 tablespoons of baking soda to 2L of
water.
• Wash the storage basket with a mild detergent solution.
• Be sure to keep the door seal clean to keep the unit running efficiently.
• The outside of the fridge should be cleaned with mild detergent and
warm water.
• Dry the interior and exterior with a soft cloth.
• The condenser coils should be carefully vacuumed when they are dusty
or dirty.
• It is recommended that the unit be cleaned each time it is defrosted to
help keep the unit odour free and running efficiently.
• Clean your door gasket seals every 3 months using the same warm
water solution described above.
Cleaning tips
• Condensation may appear on the outside of the unit. This may be
due to a change in room temperature. Wipe of any moisture residue.
If the problem continues, please contact a qualified technician for
assistance.
Care When Handling / Moving Your Unit
• Hold the unit around its sides or base when moving it. Under no
circumstances should it be lifted by holding the edges of the top
surface.
To Next Page
Loading...