10
Floor Brush
Assembly: Insert the floor brush into the extension tube and push it in until it audibly clicks.
Disassembly: Press the floor brush release button on the extension tube and pull the
extension tube away from the floor brush.
Charging Dock Assembly
Assembly: Insert the extension tube into the charging dock and push it in until it audibly
clicks.
Disassembly: Press the release button and remove the extension tube.
Base Station Assembly
Assembly: Insert the extension tube into the base station and push it in until it audibly
clicks.
Disassembly: Press the release button and remove the extension tube.
To Next Page
Loading...
