17
Filter & HEPA Filter Assembly
1. Rinse the metal filter with clean water.
2. Do not use the vacuum cleaner without the filters installed.
3. Allow the dust cup and filters to thoroughly air dry for 24 hours before reassembly.
Note: It is recommended to clean the HEPA filter screen once a week to maintain optimal
performance.
Cleaning The Roller Brush
1. Press the roller brush release button and remove the roller brush.
2. Remove any hair and other dirt tangled around the roller brush.
3. Rinse the roller brush in water.
4. Allow the roller brush and filters to thoroughly air dry for 24 hours before reassembly.
To Next Page
Loading...
