VIII Safety Precautions and Instructions
TP-5592 7/96
Notice
NOTICE
This generator set has been rewired from its
nameplate voltage to:
246242
NOTICE
Voltage reconnection! Affix notice to generator set
after reconnecting to a voltage different than the
nameplate. Order voltage reconnection decal 246242
from authorized service distributors/dealers.
NOTICE
Hardwaredamage! Engineandgeneratorsetmayuse
both American Standard and metric hardware. Use the
correct size tools to prevent rounding of bolt heads and
nuts.
NOTICE
When replacing hardware, do not substitute with
inferior grade hardware. Screws and nuts are
available in different hardness ratings. American
Standard hardware uses a series of markings and
metric hardware uses a numeric system to indicate
hardness. Check markings on bolt head and nuts for
identification.
NOTICE
Fuse replacement! Replace fuses with fuses of the
sameampereratingandtype(forexample:ABCor3AC,
ceramic). Do not substitute clear glass-type fuses for
ceramic fuses. If ampere rating is unknown or
questionable, see wiring diagram.
NOTICE
Seawater damage! High-mineral content seawater
(saltwater) causes rapid deterioration of all metals.
Wipe up all saltwater spillage on and around generator
set and keep metal surfaces free from accumulatedsalt
deposits.
To Next Page
Loading...
Need help?
General
