What to do if battery connections are loose on a Kohler Inverter?
If the battery connections of your Kohler Inverter are loose, corroded, or incorrect, verify that the battery connections are correct, clean, and tight.
What to do if Kohler Inverter has an overspeed shutdown?
If your Kohler Inverter experiences an overspeed shutdown, reset the controller. If the overspeed fault occurs again, contact the distributor/dealer.
What to do if my Kohler Inverter has a high temperature shutdown?
If your Kohler Inverter experiences a high temperature shutdown, allow the engine to cool down, and then troubleshoot the cooling system to identify and resolve the underlying issue.
What to do if the fuel tank is empty in my Kohler Inverter?
If the fuel tank of your Kohler Inverter is empty or the fuel valve is shut off, add fuel and move the fuel valve to the ON position.
How to fix faulty ground connection in Kohler Inverter?
If you have a faulty ground connection in your Kohler Inverter, clean and retighten the connection.
What to do if Kohler Inverter has exhaust system leak?
If there's an exhaust system leak in your Kohler Inverter, inspect the exhaust system. Replace the inoperative exhaust system components.
How to secure exhaust system in Kohler Inverter?
If the exhaust system of your Kohler Inverter is not securely installed, inspect the exhaust system and tighten the loose exhaust system components.
What to do if Kohler Inverter has overcrank shutdown?
If your Kohler Inverter experiences an overcrank shutdown, reset the controller. If the overcrank fault occurs again, contact the distributor/dealer.
How to fix excessive vibration in Kohler Inverter?
If your Kohler Inverter experiences excessive vibration, tighten all loose hardware.
How to fix vibration in Kohler Inverter?
If your Kohler Inverter experiences excessive vibration, tighten loose components.
General| Model | 13ERG |
|---|---|
| AC Output Voltage | 120V |
| Frequency | 60 Hz |
| Fuel Type | Gasoline |
| Category | Inverter |
| Outlet Types | (2) 120V 20A Outlets |
| Dimensions (L x W x H) | 44.5" x 29.5" x 40.5" |
| Warranty | 3 years residential, 1 year commercial |
Manual covers operation of mobile generator sets.
Covers accidental starting, battery, fuel, noise, voltage, and moving parts hazards.
Includes hardware, ESD, and USCG compliance notices for safe operation.
Explains controls, indicators, starting, stopping, and fault handling of the ADC 2100.
Outlines general maintenance tasks and the service schedule intervals.
Lists common faults, probable causes, and recommended actions for the generator set.
To Next Page
