What to do if battery connections are loose on a Kohler Inverter?
If the battery connections of your Kohler Inverter are loose, corroded, or incorrect, verify that the battery connections are correct, clean, and tight.
What to do if Kohler Inverter has an overspeed shutdown?
If your Kohler Inverter experiences an overspeed shutdown, reset the controller. If the overspeed fault occurs again, contact the distributor/dealer.
What to do if my Kohler Inverter has a high temperature shutdown?
If your Kohler Inverter experiences a high temperature shutdown, allow the engine to cool down, and then troubleshoot the cooling system to identify and resolve the underlying issue.
What to do if the fuel tank is empty in my Kohler Inverter?
If the fuel tank of your Kohler Inverter is empty or the fuel valve is shut off, add fuel and move the fuel valve to the ON position.
How to fix faulty ground connection in Kohler Inverter?
If you have a faulty ground connection in your Kohler Inverter, clean and retighten the connection.
What to do if Kohler Inverter has exhaust system leak?
If there's an exhaust system leak in your Kohler Inverter, inspect the exhaust system. Replace the inoperative exhaust system components.
How to secure exhaust system in Kohler Inverter?
If the exhaust system of your Kohler Inverter is not securely installed, inspect the exhaust system and tighten the loose exhaust system components.
What to do if Kohler Inverter has overcrank shutdown?
If your Kohler Inverter experiences an overcrank shutdown, reset the controller. If the overcrank fault occurs again, contact the distributor/dealer.
How to fix excessive vibration in Kohler Inverter?
If your Kohler Inverter experiences excessive vibration, tighten all loose hardware.
How to fix vibration in Kohler Inverter?
If your Kohler Inverter experiences excessive vibration, tighten loose components.
General| Power Output | 10 kW |
|---|---|
| AC Output Voltage | 120/240 V |
| Frequency | 60 Hz |
| Fuel Type | Gasoline |
| Starting System | Electric |
| Noise Level | 68 dB at 23 feet |
| Engine | Kohler |
| Phase | Single Phase |
| Dimensions | 22.5 in |
Guidance on preventing unintended generator set startup during maintenance.
Precautions for handling sulfuric acid and battery gases to prevent injury.
Risks of carbon monoxide poisoning from exhaust fumes and safety measures.
Warnings and precautions related to explosive fuel vapors and leaks.
Information on hazardous voltage, electrical shock, and backfeed prevention.
Warnings about hot engine components and hazards from moving parts.
Contact information and resources for professional generator set advice and service.
List of common parts for generator set maintenance and service.
Identification of available literature for generator set installation and operation.
Essential checks to perform before starting the generator set.
User interface and operation of the ADC 2100 controller.
Procedures for local and automatic starting and stopping the unit.
Understanding fault codes and how to reset the controller after a shutdown.
Information on line circuit breakers and fuses for system protection.
Basic safety and service notes for general maintenance tasks.
Recommended maintenance intervals for generator set components.
Procedures for checking, adding, and changing engine oil and filters.
Guidance on fuel specifications and fuel filter service.
Procedures for checking, draining, filling, and flushing the cooling system.
Instructions for servicing spark plugs, including inspection and gap adjustment.
Guidance on battery care and checking alternator belt tension.
Steps for preparing the generator set for long-term storage.
To Next Page
