What to do if Kohler Inverter has engine overload?
If the engine of your Kohler Inverter is overloaded, reduce the electrical load. See the generator set installation manual for wattage specifications.
What to do if Kohler Inverter has low oil pressure shutdown?
If your Kohler Inverter experiences low oil pressure shutdown, check the oil level.
General| Power Output | 10 kW |
|---|---|
| AC Output Voltage | 120/240 V |
| Frequency | 60 Hz |
| Fuel Type | Gasoline |
| Starting System | Electric |
| Noise Level | 68 dB at 23 feet |
| Engine | Kohler |
| Phase | Single Phase |
| Dimensions | 22.5 in |
Guidance on preventing unintended generator set startup during maintenance.
Precautions for handling sulfuric acid and battery gases to prevent injury.
Risks of carbon monoxide poisoning from exhaust fumes and safety measures.
Warnings and precautions related to explosive fuel vapors and leaks.
Information on hazardous voltage, electrical shock, and backfeed prevention.
Warnings about hot engine components and hazards from moving parts.
Contact information and resources for professional generator set advice and service.
List of common parts for generator set maintenance and service.
Identification of available literature for generator set installation and operation.
Essential checks to perform before starting the generator set.
User interface and operation of the ADC 2100 controller.
Procedures for local and automatic starting and stopping the unit.
Understanding fault codes and how to reset the controller after a shutdown.
Information on line circuit breakers and fuses for system protection.
Basic safety and service notes for general maintenance tasks.
Recommended maintenance intervals for generator set components.
Procedures for checking, adding, and changing engine oil and filters.
Guidance on fuel specifications and fuel filter service.
Procedures for checking, draining, filling, and flushing the cooling system.
Instructions for servicing spark plugs, including inspection and gap adjustment.
Guidance on battery care and checking alternator belt tension.
Steps for preparing the generator set for long-term storage.
To Next Page
