To Next PageTo Next Page
Need help?Do you have a question about the Kohler C3-035 and is the answer not in the manual?
Secure the mounting plate to the toilet bowl using screws and washers, tightening with a screwdriver.
Slide the bidet seat onto the installed mounting plate until it snaps into place.
Connect the T-valve to the bidet seat hose and then connect the water supply to the T-valve.
Twist the knob counterclockwise for front wash and adjust water pressure.
Twist the knob clockwise for rear wash and adjust water pressure.
Restore the knob to its default position to stop the wash function.
Press the quick release button and slide the bidet seat off the mounting plate.
Clean exterior with mild soap and water. Use soft abrasives if needed. Avoid strong abrasives, impact, and direct UV light.
This document outlines the installation, operation, and maintenance of the Kohler C3-035 Manual Bidet Seat (K-28010K), a non-electric bidet seat designed to enhance personal hygiene. The manual emphasizes the product's quality, dependability, and sophisticated design, reflecting Kohler's commitment to customer satisfaction.
The Kohler C3-035 Manual Bidet Seat is a non-electric bidet attachment that provides front and rear washing functions for improved personal hygiene. It integrates seamlessly with existing toilet bowls, offering a convenient and comfortable cleansing experience without the need for electrical power. The bidet seat is designed for easy installation and user-friendly operation, allowing individuals to control water pressure and spray direction manually. Its primary function is to provide a gentle and effective water-based cleanse, serving as an alternative or supplement to traditional toilet paper. The manual control mechanism ensures reliability and simplicity, making it a practical addition to any bathroom.
The bidet seat offers intuitive manual controls for both front and rear wash functions. To activate the front wash, users twist a knob counterclockwise. This action initiates the water spray and allows for simultaneous adjustment of water pressure, providing a customized cleansing experience. For the rear wash, the knob is twisted clockwise, similarly activating the spray and enabling water pressure adjustments. The design ensures that users can easily fine-tune the water intensity to their preference, promoting comfort and effectiveness. To stop either wash function, the knob is simply returned to its default, central position. This straightforward control mechanism makes the bidet seat accessible and easy to operate for all users. The installation process is also designed for simplicity, involving securing a mounting plate to the toilet bowl with screws and washers, then sliding the bidet seat onto the plate until it snaps into place. Finally, the T-valve is connected to the toilet seat's hose, and the water supply is connected to the T-valve, completing the setup. The quick-release button allows for easy removal of the bidet seat from the mounting plate, facilitating thorough cleaning and maintenance.
Maintaining the Kohler C3-035 Manual Bidet Seat is straightforward, with a focus on ensuring longevity and hygiene. For complete cleaning, the bidet seat can be easily removed from the toilet bowl by pushing the quick-release button and sliding it off the mounting plate. This feature allows for access to all surfaces, ensuring a thorough clean. The exterior of the bidet seat should be cleaned with mild soap and warm water. After washing, it is crucial to wipe the entire surface completely dry with a clean, soft cloth to prevent water spots and residue buildup. While soft abrasive cleaners can be used when necessary, strong abrasive cleaners should be avoided as they can scratch and dull the surface finish. If such cleaners are used, surfaces must be wiped clean and rinsed completely with water immediately after application. For excessively dirty surfaces, a general-purpose cleaner is recommended. Users are cautioned against standing on the toilet seat, as the weight could damage the hinges, compromising the product's integrity. Care should also be taken when opening and closing the seat to prevent overforcing, which could crush the seat. Additionally, direct exposure to strong light, such as ultraviolet lamps, should be avoided to protect the material. The manual also warns against using strong acid or strong alkali chemicals, as well as subjecting the seat to impact (bangs), all of which can damage the product. Adhering to these maintenance guidelines will help preserve the appearance and functionality of the bidet seat for years to come.
General| Product Type | Bidet Seat |
|---|---|
| Power Source | Electric |
| Water Temperature Control | Yes |
| Heated Seat | Yes |
| Remote Control | Yes |
| Shape | Elongated |
| Material | Plastic |
| Color | White |
| Oscillation | Yes |
| Bowl Shape | Elongated |
| ADA Compliant | Yes |
| Seat Included | Yes |
| Warranty | 1 year limited warranty |
| Rough-In Size | 12 inches |
