7. Install the Seat
Release
Button
Mounting
Plate
Position the Seat
Engage the rear edge of the seat with the lip on the mounting bracket. Tilt the seat
down to lock in place.
Check the positioning of the seat. Adjust the position as needed until the seat
aligns with the front edge of the bowl.
Adjust the Seat
Press and hold the release buon.
Tilt the seat up and lift to remove. Avoid puing pressure on the hoses.
Reposition the mounting plate as needed.
Secure the Seat
Securely tighten the mounting plate bolts and nuts.
Engage the rear edge of the seat with the lip on the mounting bracket. Tilt the seat
down to lock in place.
Kohler Co. 11
1354689-2-D
To Next Page
Loading...
Need help?
General