1. Preparation
Remote Dock
36"
(914 mm)
38" (965 mm) Min
66" (1676 mm) Max
If applicable, remove the existing toilet seat.
Turn OFF the water supply to the toilet.
Flush the toilet to relieve any pressure from the supply hose.
Disconnect the water supply hose from the toilet ll valve.
Determine the installation location for the remote control docking station on the
wall. If no remote control is provided, continue to the “Install an Electrical Outlet”
section.
Kohler Co. 5
1354689-2-D
To Next Page
Loading...
