Kohler C3-430 - Connect the Water Supply

8. Connect the Water Supply
Supply Stop
Supply Hose
T-Valve
Gasket
Water Line
CAUTION: Risk of property or product damage. Pushing or pulling on the
w
ater connection may cause water leakage.
NOTICE: Use care to avoid cross-threading or overtightening the connections. Use
an adjustable wrench to tighten one-quarter turn past hand-tight.
Connect the T-valve to the water line.
If needed, connect the supply hose to the supply stop.
Connect the supply hose to the T-valve.
Verify that the gasket is installed inside the T-valve.
Connect the T-valve to the water inlet on the toilet tank.
Turn ON the water supply.
Check all connections for leaks, and make adjustments as needed.
1354689-2-D
12 Kohler Co.