Do you have a question about the Kohler Command PRO CH620-CH740 and is the answer not in the manual?
Read safety precautions and operating instructions carefully before operating equipment.
Ensure engine is stopped and level before performing any maintenance or service.
Review warranty coverage for specific rights and obligations.
Maintain compliance with emission regulations; check backpressure limits.
Definition of a hazard that could result in death, serious injury, or property damage.
Definition of a hazard that could result in minor personal injury or property damage.
Definition of NOTE for conveying important operational information.
Warning about explosive fuel causing fires and severe burns.
Warning about carbon monoxide causing severe illness or death.
Warning about accidental starts causing severe injury or death.
Warning about rotating parts causing severe injury.
Caution about electrical shock causing injury.
Warning about hot parts causing severe burns.
Warning regarding chemicals known to cause cancer, birth defects, or reproductive harm.
Tips for starting the engine in cold weather conditions.
Procedure for safely stopping the engine.
Guidelines on maximum operating angle for engine lubrication.
Note on governor setting and maximum engine speed.
Information on cold weather operation and available kits.
Requirements for operating engine at high altitudes.
Schedule of maintenance tasks based on operating hours or time.
Recommendations for engine oil type and viscosity based on temperature.
Procedure for checking and maintaining the engine oil level.
Requirements for gasoline quality, octane, and additives.
Low permeation fuel line requirement for compliance.
Maintenance procedures for air cleaner systems.
Ensure breather tube is properly connected.
Importance of proper air cooling and cleaning external surfaces.
Information on obtaining authorized service and replacement parts.
Procedures for storing the engine for 2 months or more.
Technical specifications for various engine models, including dimensions and capacities.