Need help?Do you have a question about the Kohler Command Pro CH1000 and is the answer not in the manual?
General| Cooling System | Air-cooled |
|---|---|
| Starter | Electric |
| Displacement | 999 cc |
| Power | 38 hp (28.3 kW) |
| Oil Capacity | 1.9 L |
| Fuel System | Carburetor |
| Ignition System | Electronic |
| Lubrication | Full pressure with spin-on oil filter |
Covers hazards of gasoline, storage, and fueling procedures.
Advises keeping body parts and clothing away from moving engine components.
Warns about touching hot engine parts during or after operation.
Caution against touching electrical wires while the engine is running.
Alerts to chemicals in exhaust known to cause cancer or reproductive harm.
Precautions to prevent accidental engine starting during servicing.
Warns about deadly effects of carbon monoxide exhaust fumes.
Hazards associated with charging batteries and potential for explosion.
Specifies use of high quality detergent oil and viscosity based on temperature.
Advice on purchasing, storing, and handling gasoline for optimal engine performance.
Details on unleaded gasoline, octane ratings, and alcohol/ether blends.
Locating and recording engine model, specification, and serial numbers.
Explains how model numbers and suffixes designate engine features.
Essential checks before starting the engine for safe operation.
Instructions for connecting throttle and choke control linkages.
Tips for starting the engine effectively in cold temperatures.
Step-by-step guide on how to start the engine.
Instructions for safely shutting down the engine.
Information regarding the 12-volt battery used for starting.
Maximum allowable angles for continuous engine operation to prevent damage.
Importance of keeping cooling air intake areas clean to prevent overheating.
Table outlining required maintenance tasks and their frequency.
Step-by-step guide for checking the engine oil level before each use.
Explanation of the oil pressure switch that monitors and warns about oil levels.
Detailed steps for changing the engine oil and oil filter, including torque specs.
Steps for replacing the engine oil filter, including cleaning and torque.
Maintenance for the heavy-duty style air cleaner, including element inspection.
Details on checking and replacing elements for heavy-duty air cleaners.
Instructions for servicing the flat air cleaner element and precleaner.
Steps for washing and reoiling the precleaner component of the air cleaner.
Procedure for replacing the paper element in the air cleaner assembly.
Ensuring clean intake and cooling surfaces for proper engine operation.
Procedure for checking spark plug gap, condition, and replacement.
Safety warning and procedure for charging the engine's 12-volt battery.
Guidance on inspecting and replacing the in-line fuel filter.
Details on the approved low permeation fuel line for emission compliance.
Procedure for setting low idle speed, governed idle, and low idle fuel needles.
Detailed steps for setting the low idle fuel mixture for optimal performance.
Information on the high speed RPM adjustment screw, typically factory set.
Steps for preparing the engine for long-term storage to prevent damage.
Information on identifying and ordering genuine Kohler replacement parts.
Guidance on when major repairs are needed and where to get them done.
Details of the manufacturer's warranty coverage, exclusions, and claims process.
Details on what is covered and for how long under the warranty.
Owner's duties regarding maintenance and proper use to maintain warranty coverage.
Explains coverage for defects causing non-conformity with regulations.
List of specific engine parts covered under the emission control warranty.
Exclusions from warranty coverage, including misuse, neglect, and non-conforming modifications.
Owner's responsibility for maintenance records and authorized repair procedures.
To Next Page