Kohler Co. 3 1102602-A2-H
Pan Installation
2 Dene the position of connector: Place the connector onto the pan, position
between outlet and waste pipe.
3 Mark the positions of the oor xing kit holes.
Use the template (if supplied)
Offset Pan Collar
1 Remove the existing toilet: Turn o the water supply and ush the toilet, then
sponge out all remaining water from the cistern. Disconnect the supply shut-o
valve (if present), and remove the old pan and cistern.
CAUTION: Risk
of hazardous gases. If the new toilet is not installed immediately,
temporarity stu a rag in the closet ange. Ensure this is removed befor installing
the new toilet
To Next Page
Loading...
