Kohler TAHOE User Manual

SEALANT
3/8” D.
5/8”
LAVATORY
MARBLE SLAB
INSTALLATION
WOOD COUNTER
INSTALLATION
LAVATORY
SEALANT
NOTE: WATERPROOF UNPROTECTED OVERHANG
AREA ON THE UNDERSIDE OF WOOD COUNTER
1.05>116
4”
3/8” COLD
1-1/4” OUTLET
3/8” HOT
(S)
(T)
18”
8-1/2”
3/8”
1-1/2” R.
6-1/8”
20”
4” 4”
2”
4”


114409-2-CB
2000 Kohler Co.
TAHOE
ENAMELED CAST IRON
UNDERCOUNTER LAVATORY

PRODUCT INFORMATION
Fixture*: basin area water depth
Lavatory 16” x 12” 5”
Outlet 1-11/16” D.
* Approximate measurements for comparison only.
BEFORE YOU BEGIN
NOTES
 These instructions contain important care, cleaning,
and warranty information – please leave instructions
for the consumer.
 Due to the nature of the installation, undercounter
lavatories should be installed by trained and
experienced installers.
 Prior to installation, unpack the new lavatory and
carefully inspect it for damage. Return the lavatory
to its protective carton until you are ready to install
it.
 Do not use adhesives or adhesive sealants with this
product.
TOOLS AND MATERIALS REQUIRED
 Safety glasses
 Safety shoes
 Pencil
 Scissors
 Tape measure
 Putty knife
 Sealant
 Screwdriver
 Hole saw
 Keyhole saw or saber saw
 Drill (1/2” dia. drill bit or larger)
Roughing-In Notes
Fixture dimensions are nominal and conform to tolerances
in ASME/ANSI Standard A112.19.1M.
( T ) Pop-up drain 14-1/8”, grid drain 13-1/4”.
( S ) 10” (Based on 12” riser which may require cutting).
Holes in undercounter fixture are oversized. Drill fitting
holes in counter according to fitting rough-in.

Kohler TAHOE Specifications

General

Mounting Type	Floor Mounted
Bowl Shape	Elongated
ADA Compliant	Yes
Material	Vitreous China
Number of Handles	1
Type	Toilet
Flush Type	Gravity
Rough-In Size	12 inches
Flush Valve Size	3 inches
Water Consumption	1.28 gallons per flush
Color Options	White, Biscuit, Black
Product Type	Toilet

Summary

Product Information

Before You Begin

Installation Process

Template and Cutout

Cut and trace template for countertop opening, check lavatory fit.

Faucet Hole Drilling

Drill faucet holes according to specified centers and diameter.

Countertop Preparation

Drill anchor holes for marble/solid surface, pre-drill for wood.

Lavatory Mounting

Apply sealant and attach lavatory using hardware, do not overtighten.

Final Connections and Checks

Allow sealant to set, connect fittings, check for leaks.

Parts Information

Important Consumer Information

Cleaning Your Cast Iron Lavatory

Guidance on cleaning to maintain the enamel surface and avoid damage.

Requesting Service

Steps to follow when seeking warranty service or technical assistance.

Lifetime Limited Warranty

Details the warranty coverage, limitations, and exclusions for cast iron products.