C.
Clean or replace the filer if there's not enough water volume or water is not coming out.
Pull the plug
Turn off inlet water supply.
switch
button
Turn off stop valve
Turn off powersupplyor turn off power switch as shown.
Take out filter and clean it.
Tighten
Turn on
Notes:
If filter is found broken or serious blocked, please replace it in time.
Cleaning or Replacing the Filter
Cleaning the toilet filter
Reinstall filter and turn stop valve on.
Inspect joint for any water leak, then plug power cord
Install side board.
The steps to replace filter are the same as the above steps.
To Next Page
Loading...
