Kohler K-10217 Installation Guide

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Tools and Materials
Before You Begin
IMPORTANT! Plumbers putty is not needed to install this faucet.
The base of the faucet acts as a water barrier.
Observe all local plumbing and building codes.
Shut off the main water supply.
Inspect the supply tubing for damage. Replace as necessary.
Clean the lavatory surface to remove any grease, oil, or debris.
This faucet is for use on a single-hole lavatory.
For new installations, install the faucet and drain to the lavatory
before installing the lavatory.
Kohler Co. reserves the right to make revisions in the design of
faucets without notice, as specified in the Price Book.
Adjustable
Wrench
Thread
Sealant
Plumbers
Putty
Hex
Wrench
1056603-2-A 2 Kohler Co.

Kohler K-10217 Specifications

General

Brand	Kohler
Model	K-10217
Category	Plumbing Product
Language	English