4. Installation Checkout
Connect the drain tailpiece into the P-trap.
Remove the aerator from the faucet spout.
Open the drain.
Turn on the main water supply and check for leaks. Repair as
needed.
Lift and rotate the faucet handle to the full hot position, then the
full cold position. Run water through the spout for about one
minute to remove any debris. Check for leaks and repair as
needed.
Push the lever handle down to close the water supplies, then
reinstall the aerator.
Aerator
Faucet Spout
1056603-2-A 6 Kohler Co.
To Next Page
Loading...
