JOBNAME: No Job Name PAGE: 17 SESS: 17 OUTPUT: Tue Apr 29 07:42:31 2014
Cleaning the Filter Screen
NOTE: The filter screen should be cleaned once every six months or
any time there is a drop in water pressure to the bidet wand.
Remove the seat.
Turn off the water supply at the supply stop.
Disconnect the water supply hose from the seat.
Using a long-nosed pliers, carefully remove the filter screen from
the seat inlet.
Clean the filter screen with a soft-bristled brush.
Reinstall the filter screen.
Reinstall the seat.
IMPORTANT! Risk of product damage. Do not cross-thread the
connection.
Reconnect the water supply hose to the seat.
Turn on the water supply.
Check all connections for leaks and make any adjustments as
needed.
Filter Screen
Long-Nosed Pliers
Kohler Co. 17 1194356-5-A
To Next Page
Loading...
