Care and Cleaning Instructions — Shower Receptor
Wipe out after each use with a soft cloth or squeegee.
Use only a mild detergent (such as dishwashing soap). Do not use abrasive cleaners.
Avoid detergents, disinfectants, or cleaning products in aerosol cans.
If the surface becomes excessively dirty, use a general purpose cleaner such as Gel Gloss
®
(bath and
shower only), Scrub Free
®
Mildew Stain Remover, Formula 409
®
All Purpose Cleaner, Mr. Clean
®
Lemon Fresh, Cinch
®
, Glass Plus
®
, or Fantastik
®
All Purpose.
NOTE: To restore dull or scratched shower surfaces: Apply white automotive polishing compound with a
clean rag. Rub scratches and dull areas vigorously. Wipe off residue. Follow with a coat of white
automotive paste wax. Do not wax areas where you walk or stand.
1000705-5-C 8 Kohler Co.
To Next Page
Loading...
