Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Tools and Materials
Before You Begin
Due to the varying possible installation applications, the speaker
wire is not supplied with this product.
12-16 AWG jacketed speaker wire is recommended for this
installation.
Female quick disconnect terminals are recommended for this
installation, (1) 0.187″ x 0.020″ for the positive connection and (1)
0.110″ x 0.020″ for the negative connection.
This speaker assembly is designed to be installed to the finished
wall or ceiling.
Observe all local plumbing, building, and electrical codes.
Read these instructions and determine all required components
along with their installation locations before beginning this
installation.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
Pencil
Level
Screwdrivers
3/16" Hex
Wrench
Shims
Jigsaw
Silicone
Sealant
Propane
Torch
Solder
Kohler Co. 3 1070937-2-A
To Next Page
Loading...
Need help?
General