Kohler K-9132 Installation And Care Guide

4. Installation Checkout
Plug the drain pipe, then run water into the drain.
Check for leaks at the joint around the flange of the strainer body.
Unplug the drain pipe.
Press the strainer plate firmly into the strainer body.
Vérification de l’installation
Raccorder le tuyau du drain puis faire couler de l’eau dans le drain.
Vérifier s’ilyadesfuites au niveau du joint autour de la bride du corps de la
crépine.
Déconnecter le tuyau de drain.
Presser fermement la plaque de la crépine dans son corps.
Verificación de la instalación
Tape el tubo de desagüe, luego deje correr agua al desagüe.
Verifique que no haya fugas en la junta alrededor de la brida del cuerpo de la
coladera.
Destape el tubo de desagüe.
Presione bien la placa de la coladera en el cuerpo de la coladera.
Care and Cleaning
For best results, keep the following in mind when caring for your KOHLER product:
•
Use a mild detergent such as liquid dishwashing soap and warm water for
cleaning. Do not use abrasive cleaners that may scratch or dull the surface.
•
Carefully read the cleaner product label to ensure the cleaner is safe for use on the
material.
•
Always test your cleaning solution on an inconspicuous area before applying to
the entire surface.
Strainer Body
Corps de crépine
Cuerpo de la coladera
Drain Plug
Bouchon de drain
Tapón del desagüe
Strainer Plate
Plaque de crépine
Placa de la coladera
1114755-2-B 12 Kohler Co.

Kohler K-9132 Specifications

General

Brand	Kohler
Model	K-9132
Category	Plumbing Product
Language	English