Kohler K-T387 Installation Guide

4. Installation Checkout
Verify the handle valves are closed. (Hot = clockwise; cold =
counterclockwise.)
Make sure that all connections are tight.
Remove the aerator assembly.
Turn on the main water supply and check for leaks.
Turn on the hot and cold valves and run water through the spout
to remove debris. Check for leaks.
Confirm proper diverter operation.
Turn the hot and cold handles to the off position and then back to
the on position. Verify that the water flow is diverted back to the
spout.
Close the hot and cold valves to turn off the water.
Remove any debris from the aerator.
Reinstall the aerator assembly.
Aerator
1049620-2-B 6 Kohler Co.

Kohler K-T387 Specifications

General

Brand	Kohler
Model	K-T387
Category	Plumbing Product
Language	English