Kohler K241 User Manual (English)

Other manuals for Kohler K241

Owner's Manual16 pages

Multi-Language Owner's Manual8 pages

Questions and Answers:

K
Kevin CoxJul 26, 2025
What to do if Kohler K241 Engine cranks but will not start?
- C
  coreywillisJul 26, 2025
  If your Kohler Engine cranks but won't start, it could be due to an empty fuel tank, a loose spark plug lead, loose wires intermittently shorting the ignition to ground, a closed fuel shutoff valve, a clogged fuel line, a disconnected spark plug lead, the keyswitch or kill switch being in the "off" position, an improperly adjusted carburetor, engine overheating, or incorrect valve-to-tappet clearance.
C
Christina BenjaminJul 30, 2025
Why Kohler K241 will not crank?
- T
  Tyler WilcoxJul 30, 2025
  Your Kohler Engine may not crank because the hydrostatic transmission is not in neutral, the PTO drive is engaged, the engine is overheating, the spark plug is faulty, the carburetor is improperly adjusted, or there is low compression.
A
Aaron CarrollAug 3, 2025
Why Kohler K241 Engine starts but does not keep running?
- H
  Hannah CarsonAug 3, 2025
  If your Kohler Engine starts but doesn't keep running, it could be due to an improperly set idle speed adjusting screw, dirt or water in the fuel system, an improperly set idle fuel adjusting screw, a restricted fuel tank vent, faulty choke or throttle controls/cables, loose wires shorting the ignition to ground, a faulty spark plug, incorrect valve-to-tappet clearance, or low compression.
S
Steven YorkAug 8, 2025
Why Kohler K241 Engine loses power?
- C
  Christopher JonesAug 8, 2025
  Your Kohler Engine may be losing power due to several reasons. These include a low or high crankcase oil level, a restricted air cleaner element, dirt or water in the fuel system, excessive engine load, a faulty ACR mechanism, a faulty spark plug, an improperly adjusted carburetor, incorrect valve-to-tappet clearance, or low compression.
J
justin48Aug 12, 2025
What to do if Kohler Engine overheats?
- T
  Tara TaylorAug 12, 2025
  If your Kohler Engine is overheating, it might be caused by a clogged grass screen, cooling fins, or shrouding. It could also be due to excessive engine load, a faulty cylinder head gasket, or a faulty fuel pump.
K
Karl HolmesAug 16, 2025
What to do if Kohler Engine knocks?
- M
  Michelle ArmstrongAug 16, 2025
  If your Kohler Engine is knocking, it could be due to a low crankcase oil level, excessive engine load, clogged or restricted fuel lines, or faulty choke or throttle controls/cables.
C
carla52Aug 21, 2025
What to do if Kohler K241 runs but misses?
- B
  Brian RobinsonAug 21, 2025
  If your Kohler Engine runs but misses, the possible causes may be dirt or water in the fuel system, a faulty keyswitch or ignition switch, a faulty electric starter/starter solenoid, a retractable starter not engaging in the drive cup, or seized internal engine components.

Kohler K241 Specifications

General

Fuel Type	Gasoline
Cooling System	Air-cooled
Engine Type	Single cylinder, 4-stroke
Ignition	Battery
Oil Capacity	1.5 quarts
Starter	Electric
Power	10 hp (7.46 kW) @ 3600 rpm
Weight	118 lbs