Kohler KG125 User Manual

16 TP-7173 10/20
Service Schedule, continued
System—Component
Action
Interval
Visually Inspect
Check
Change
Clean
Test
Yearly
Tighten control and power wiring connections
X
Yearly
Air ducts, louvers
X
X
Yearly
Fuel piping
X
Yearly
Louver motors and controls
X
X
X
Yearly
Radiator exterior
X
X
Yearly
Water supply to the heat exchanger
X
Yearly
Excessive back pressure
X
Yearly
Hangers and supports
X
Yearly
Battery load testing
X
Yearly
Two Years
APM603 RTC battery
R
When indicated by the
controller, 2–10 Years
Three Years
Wire-cable insulation breakdown
X
X
3 Years or
500 Hrs.
Refer to Engine Operation Manual
General engine inspection
⚫
Refer to engine
operation manual for
service intervals and
instructions.
Air cleaner service
⚫
⚫
Ignition components
⚫
⚫
Bolt torque
⚫
⚫
Change oil
⚫
Replace filter(s)*
⚫
Coolant
⚫
Tightness of the oil cooler and charge air cooler couplers.
X
X
Refer to Alternator Operation Manual
General alternator inspection
X
Refer to alternator
operation manual for
service intervals and
instructions
Rotor and stator
X
X
Bearing condition
X
X
R
Exciter
X
X
X
Blow dust out of alternator*
X
⚫
Measure and record resistance readings of windings with
insulation tester (Megger®, with SCR assembly or rectifier
disconnected)
X
⚫ Follow procedures and frequencies indicated in the engine manufacturer’s maintenance manual. If not indicated, follow this service
schedule. Some items may not apply to all generator sets.
R Replace as necessary.
X Action.
* Service more frequently if operated in dusty areas.
Note: For the Voltage-sensing device/relay adjustment, do not break manufacturer’s seals or internally inspect these devices.
Megger
®
is a registered trademark of Biddle Instruments.

Kohler KG125 Specifications

General

Brand	Kohler
Model	KG125
Category	Portable Generator
Language	English