These instructions must be left
with the user
Use your thumb or a soft cloth to wipe any
limescale from the soft nozzles.
Unscrew the hose from the showerhead and the
shower outlet.
Inspect the hose.
Unscrew the hose from the
showerhead and the shower outlet.
Inspect the hose.
Cleaning
Many household and commercial cleaners, including hand and
surface cleaning wipes contain abrasives and chemical substances
that can damage plastics, plating and printing and should not be used.
These nishes should be cleaned with a mild washing up detergent
or soap solution, and then wiped dry using a soft cloth.
Always read the IMPORTANT SAFETY INFORMATION in your
shower user guide.
De-scaling the Showerhead and Inspecting the Hose
1397684-W2-A
© Kohler Mira Limited, February 2020
What to do if something goes wrong
If your product does not work correctly refer to this manual for fault diagnosis
and check that it is installed and commissioned in accordance with our
instructions.
If this does not resolve the issue, contact us for help and advice.
Helpdesk Service - Our Customer Services Team is comprehensively
trained and can oer help and advice, spare parts and accessories.
Please provide your model name or number and date of purchase.
Showers Website (www.mirashowers.co.uk)
From our website you can download additional user guides, diagnose
faults, purchase our full range of accessories and popular spares
and refer to our FAQs.
Spares and Accessories - We hold the largest stocks of genuine
Mira spares and accessories. Contact us for a price or visit our
website to purchase items from our accessory range and popular
spares.
01 531 9337
Mira Customer Services
Dept, Cromwell
Road, Cheltenham,
Gloucestershire, GL52 5EP
To Contact Us
E-mail: Visit www.
mirashowers.co.uk/
contactus
To Contact Us: Eire Only
0800 001 4040
Fax: 01 242 282595
E-mail: CustomerServiceEire
@mirashowers.com
Guarantee
Your product has the benet of our manufacturer’s guarantee which starts
from the date of purchase.
Within the guarantee period we will resolve defects in materials or
workmanship, free of charge, by repairing or replacing parts or product as
we may choose.
This guarantee is in addition to your statutory rights and is subject to
the following conditions:
The product must be installed and maintained in accordance with the
instructions given in this user guide.
Replacement under this guarantee does not extend the original expiry
date. The guarantee on any replacement parts or product ends at the
original expiry date.
The guarantee does not cover:
Non product faults (such as damage or performance issues arising
from incorrect installation, improper use, inappropriate cleaning, lack
of maintenance, build up of limescale, frost damage, corrosion, system
debris or blocked lters) or where no fault has been found with the product.
Compensation for loss of use of the product or consequential loss of
any kind.
Damage or defects caused if the product is repaired or modied by
persons not authorised by us or our appointed representative.
Mira is a registered trade mark of
Kohler Mira Limited.
The company reserves the right to alter
product specications without notice.
The Mira Shower Fittings have been designed for domestic use only,
Mira Showers guarantee the ttings against any defect in materials
or workmanship for a period of one year from the date of purchase.
For non-domestic installations, Mira Showers guarantee the ttings
against any defect in materials or workmanship for a period of one
year from the date of purchase.
For terms and conditions, refer to the back cover of this guide.
Mira Beat and Nectar Easy Fit
Shower Fittings
Installation and User Guide
For SPARES,
ADVICE or REPAIRS
please call us free
on 0800 001 4040
(UK only)
Customer Service
User Maintenance
Guarantee
Important! Keeping the Showerhead and Hose clean and free
from blockage will make sure your shower performs to its
optimum. The showerhead MUST be regularly cleaned and
the hose MUST be regularly inspected to ensure there is no
internal/external collapse or blockage that could reduce the
water ow.
Warning! Failure to keep the showerhead nozzles clear or
inspect the hose for blockage or internal/external collapse
can restrict the ow rate from the showerhead. This can
cause damage to the shower or may result in the temperature
delivered to the user rising to unsafe levels with a risk of
scalding.
You MUST ALWAYS check the temperature before using the
shower.
Mira Nectar
Mira Beat
To Next Page
Need help?
General
