Kohler K-T10278 User Manual

Installation Guide
Forté
Bath/Deck Mount Faucet
M product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M corresponden a México (Ej.
K-12345M)
Français, page “Français-1”
Español, página “Español-1”
K–T10278
1017937-2-A

Kohler K-T10278 Specifications

General

Brand	Kohler
Model	K-T10278
Category	Kitchen & Bath Fixtures
Language	English

Summary

Tools and Materials

Before You Begin

Review pre-installation checks and important notes before starting.

Prepare the Site

Installation on Finished Deck or Rim

Install Spout Supply Tube

Install the spout supply tube, securing it with a washer and mounting nut.

Install Valve Bodies

Mount valve bodies, connect copper tubes, and secure with collars and mounting nuts.

Installation on Rough (Unfinished) Deck

Install Spout Supply Tube

Install the spout supply tube through the rough deck, securing the plate from below.

Install Valve Bodies

Insert valve bodies through rough deck holes and connect copper tubing to the tee.

Complete Installation on Rough Deck

Set Valve Body Height

Calculate and adjust valve body height based on tile thickness for proper finish.

Connect Supply Tube

Measure, cut, and fit copper tubing to connect spout supply to the valve body tee.

Reset Valve Body Height

Fine-tune threaded collars to match the required rough deck clearance.

Solder Connections

Solder all copper tube connections to valve bodies, tee, and spout supply tube.

Check Operation of Valves

Install Tile (If Applicable)

Install Spout

Install Handles

Complete the Installation