Kohler K-8002 - User Manual

Installation Guide
Bodyspray Tile
M product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M corresponden a México (Ej.
K-12345M)
Français, page “Français-1”
Español, página “Español-1”
K-8002 K-8003
1043851-2-D

Kohler K-8002 Specifications

General

Brand	Kohler
Model	K-8002
Category	Kitchen & Bath Fixtures
Language	English

Summary

Tools and Materials

Install the Supply Piping

Multiple Bodyspray Installation

Route water supply lines and construct a pressure balancing loop for multiple bodyspray setups.

Single Bodyspray Installation

Route the water supply line and install an elbow at the bodyspray installation location.

All Installations Piping

Temporarily install a nipple to each tee/elbow without using sealant.

Install the Plaster Guard

Set the Pipe Depth

Thin Wall Pipe Depth

Adjust pipe depth using a mark and the front face of studs for thin walls.

Standard Wall Pipe Depth

Adjust pipe depth using the plaster guard edge and the front face of studs.

All Installations Pipe Depth

Install backing and strap pipes at the adjusted depth for all wall types.

Install the Finished Wall

Verify Depth and Install Nipple

Install the Waterway

Complete the Installation

Attach the Sprayhead

Secure the sprayhead to the waterway using hex screws and place nozzle membrane.

Attach the Sprayface

Align and insert the sprayface over the sprayhead ribs, ensuring proper fit.