8.6 EU Declaration of Conformity
We, SDMO Industries - 270 rue de Kerervern, 29490 GUIPAVAS/CS 40047, 29801 BREST CEDEX 9 – France, hereby declare
under our sole responsibility that the following generating sets:
09-2019-00000000-000
52-2026-99999999-999
1. Comply with the safety requirements set out in the Low Voltage Directive - 2014/35/EU of 26 February 2014 in application of the
harmonized standard EN 60204-1: 2006 (AMD 1 2006, COR 2010)
2. Comply with the provisions of the following Directives:
- Machinery - 2006/42/EC of 17th May 2006 in application of the harmonized standard EN ISO 8528-13 (2016)
- Electromagnetic compatibility - 2014/30/EU of 26th February 2014 in application of the harmonized standards EN 60034-1:
2010 (COR 2010) / EN 61000-6-1: 2007 / EN 61000-6-2: 2005 (COR 2005) / EN 61000-6-3: 2007 (AMD1 2011,
AMD1/COR 12) / EN 55011: 2009 (AMD 1 2010)
- Relating to the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2) -
2011/65/EU of 8th June 2011 (from 23rd July 2019) in application of the harmonized standard EN 50581: 2013
- Relating to noise emission in the environment by equipment for use outdoors- 2000/14/EC of 8 May 2000, via the
compliance procedure set out in Annex VI:
Measured sound
power level:
Guaranteed sound
power level (LwA):
CETIM - BP 67-
F60304 – SENLIS -
FRANCE
Name and address of the person authorized to create and hold the technical file:
L. ANDRIEUX, 270 rue de Kerervern, 29490 GUIPAVAS / CS 40047, 29801 BREST CEDEX 9 – France.
President, SDMO Industries
To Next Page
Loading...
Need help?
General
